ผู้เขียน หัวข้อ: ลงแข่ง Reverse Engineering Contest (REC IV)  (อ่าน 29249 ครั้ง)

0 สมาชิก และ 1 บุคคลทั่วไป กำลังดูหัวข้อนี้

ออฟไลน์ ake1

  • Jr. Member
  • **
  • กระทู้: 168
Re: ลงแข่ง Reverse Engineering Contest (REC IV)
« ตอบกลับ #80 เมื่อ: 28 พฤษภาคม 2015 / 10:13:49 PM »

ออฟไลน์ ake1

  • Jr. Member
  • **
  • กระทู้: 168
Re: ลงแข่ง Reverse Engineering Contest (REC IV)
« ตอบกลับ #81 เมื่อ: 30 พฤษภาคม 2015 / 01:40:24 PM »

ออฟไลน์ ake1

  • Jr. Member
  • **
  • กระทู้: 168
Re: ลงแข่ง Reverse Engineering Contest (REC IV)
« ตอบกลับ #82 เมื่อ: 31 พฤษภาคม 2015 / 09:42:44 PM »

ออฟไลน์ ake1

  • Jr. Member
  • **
  • กระทู้: 168
Re: ลงแข่ง Reverse Engineering Contest (REC IV)
« ตอบกลับ #83 เมื่อ: 01 มิถุนายน 2015 / 07:23:47 PM »
ในที่สุดก็ถึงวีคตัดสิน ผมและอีก 30 ท่านที่หนึ่งร่วม ท่านที่เหลือถือว่าตกรอบ คาดว่า Tiebreaker (ตัวบ่อนทำลายความเสมอภาค) แต่ละข้อคงอย่างโหด และมีเวลาแก้เพียง 48ชั่วโมงครับ
Tiebreaker A ยากตรงต้องเป็นการต่อที่ถูกกฎเท่านั้น (เช่นทุกชิ้นต้องติดกันได้ใน LDD)
ห้ามใช้ bar/clip
ห้ามต่อไม่สุดสตัด

You have only 48 hours to solve each challenge. I will post the second challenge June 3rd at 12:00 GMT, at which point this challenge will end. Be ready for some very difficult challenges!
 
Only those tied for first place are eligible for points this week. The main contest is over, and everyone in the running is in bold on the scoreboard.
 
Part Restrictions:
• All connections MUST be TLG-legal! (although you may put a stud anywhere in the middle of a 1x2 tile)
• No bar/clip connections
• No connections based on partially-attached studs (All parts should be connected together all the way.)

REC Tiebreaker A by eldeeem, on Flickr
« แก้ไขครั้งสุดท้าย: 01 มิถุนายน 2015 / 09:04:37 PM โดย ake1 »

ออฟไลน์ ake1

  • Jr. Member
  • **
  • กระทู้: 168
Re: ลงแข่ง Reverse Engineering Contest (REC IV)
« ตอบกลับ #84 เมื่อ: 03 มิถุนายน 2015 / 08:42:07 PM »
REC 9.1: Solved! by eldeeem, on Flickr

REC Week 9 Follow-Up by eldeeem, on Flickr

• Bottom looks the same as the top (i.e. outward-facing 1x1 tile)
• No travis brick!
REC Tiebreaker B by eldeeem, on Flickr
« แก้ไขครั้งสุดท้าย: 03 มิถุนายน 2015 / 08:54:23 PM โดย ake1 »

ออฟไลน์ deecga

  • Verified Member
  • Newbie
  • *
  • กระทู้: 30
Re: ลงแข่ง Reverse Engineering Contest (REC IV)
« ตอบกลับ #85 เมื่อ: 03 มิถุนายน 2015 / 11:10:40 PM »
สู้ๆครับ คุณเอก ขอให้ชนะนะครับ

ออฟไลน์ ake1

  • Jr. Member
  • **
  • กระทู้: 168
Re: ลงแข่ง Reverse Engineering Contest (REC IV)
« ตอบกลับ #86 เมื่อ: 04 มิถุนายน 2015 / 06:27:18 AM »
สู้ๆครับ คุณเอก ขอให้ชนะนะครับ
ขอบคุณครับ  :) 
ข้อนี้เสียดายที่กรรมการลืมห้ามใช้การต่อแบบเลื่อนไปมาได้ (infinite-connection-points) แถมมีคนเผลอบอกใบ้ว่าใช้ axle ต่อ จึงทำให้ผู้นำร่วมยังเยอะอยู่  :-\

REC 10.1: Solved!
 
I messed up and didn't disallow infinite-connection-points technic builds, but thankfully most of you went for the plates-and-brackets brickmath version. :)

REC 10.1: Solved! by eldeeem, on Flickr
« แก้ไขครั้งสุดท้าย: 04 มิถุนายน 2015 / 06:32:13 AM โดย ake1 »

ออฟไลน์ ake1

  • Jr. Member
  • **
  • กระทู้: 168
Re: ลงแข่ง Reverse Engineering Contest (REC IV)
« ตอบกลับ #87 เมื่อ: 05 มิถุนายน 2015 / 10:09:54 PM »
ตอนนี้เหลือผู้ที่ยังอยู่ในการแข่งขัน 19 คนจาก 155 คนครับ

REC 10.2: Solved! by eldeeem, on Flickr

REC Tiebreaker C by eldeeem, on Flickr
 



ออฟไลน์ goong

  • Full Member
  • ***
  • กระทู้: 263
  • Love LEGO so much.
Re: ลงแข่ง Reverse Engineering Contest (REC IV)
« ตอบกลับ #88 เมื่อ: 06 มิถุนายน 2015 / 12:58:35 AM »
เชียร์เต็มที่เลยครับ  :) :) :)

ออฟไลน์ ake1

  • Jr. Member
  • **
  • กระทู้: 168
Re: ลงแข่ง Reverse Engineering Contest (REC IV)
« ตอบกลับ #89 เมื่อ: 06 มิถุนายน 2015 / 07:43:39 AM »
เชียร์เต็มที่เลยครับ  :) :) :)
ขอบคุณที่เชียร์ครับคุณกุ้ง  :)

Week 10 C ออกจะง่ายไปหน่อย  15 คนผ่านแล้ว ที่เหลืออีก 4 คนก็คงทำได้ภาใน 48 ชม.

ออฟไลน์ ake1

  • Jr. Member
  • **
  • กระทู้: 168
Re: ลงแข่ง Reverse Engineering Contest (REC IV)
« ตอบกลับ #90 เมื่อ: 07 มิถุนายน 2015 / 07:13:32 PM »
Part Restrictions:
• The other side is the same as this one
• All parts should be attached, of course.
• No clip lights!
REC Tiebreaker D by eldeeem, on Flickr

ออฟไลน์ ake1

  • Jr. Member
  • **
  • กระทู้: 168
Re: ลงแข่ง Reverse Engineering Contest (REC IV)
« ตอบกลับ #91 เมื่อ: 08 มิถุนายน 2015 / 11:36:05 AM »
งานนี้สงสัยจะจบด้วยการเสมอ กินกันไม่ลงจริงๆครับ

REC 10.3: Solved! by eldeeem, on Flickr

ออฟไลน์ Tiggr

  • LEGO Ambassador
  • Hero Member
  • *
  • กระทู้: 1020
  • พิทักษ์สันติ ผดุงความยุติธรรม
Re: ลงแข่ง Reverse Engineering Contest (REC IV)
« ตอบกลับ #92 เมื่อ: 08 มิถุนายน 2015 / 12:04:06 PM »
แอบเอาใจช่วยเชียร์พี่เอกครับ  :D
ดูแล้วก็ให้ทึ่งในเทคนิคการต่อครับ  ต้องศึกษาไว้ เพราะบางเทคนิคเอาไปใช้ในงาน MOC ได้เลยนะครับเนี่ย  :-*

ออฟไลน์ sKKK

  • Verified Member
  • Sr. Member
  • *
  • กระทู้: 665
  • CastleMania
Re: ลงแข่ง Reverse Engineering Contest (REC IV)
« ตอบกลับ #93 เมื่อ: 08 มิถุนายน 2015 / 12:08:36 PM »
ขอบคุณพี่เอกที่เอามาเฉลยครับ ยอมรับจริงๆว่าดูไม่ออกเลยว่าต่อได้อย่างไร
เทคนิกสุดยอดจริงๆ ;D
<=====[}=@ sKingdoM @={]=====>

ออฟไลน์ ake1

  • Jr. Member
  • **
  • กระทู้: 168
Re: ลงแข่ง Reverse Engineering Contest (REC IV)
« ตอบกลับ #94 เมื่อ: 09 มิถุนายน 2015 / 09:00:58 AM »
แอบเอาใจช่วยเชียร์พี่เอกครับ  :D
ดูแล้วก็ให้ทึ่งในเทคนิคการต่อครับ  ต้องศึกษาไว้ เพราะบางเทคนิคเอาไปใช้ในงาน MOC ได้เลยนะครับเนี่ย  :-*
ขอบคุณพี่เอกที่เอามาเฉลยครับ ยอมรับจริงๆว่าดูไม่ออกเลยว่าต่อได้อย่างไร
เทคนิกสุดยอดจริงๆ ;D

ขอบคุณครับ งานนี้ทำให้เทคนิคการต่อเลโก้ของทั้งคนแข่งและคนดูเพิ่มสูงขึ้นเรื่อยๆ จึงยากที่จะออกโจทย์ที่แก้กันไม่ได้  :)

REC IV wk10 Tiebreaker B by Nachapon S., on Flickr

REC 9.2: Solved! by eldeeem, on Flickr

ออฟไลน์ vyJo

  • Global Moderator
  • Hero Member
  • *****
  • กระทู้: 1022
    • Taramizu
Re: ลงแข่ง Reverse Engineering Contest (REC IV)
« ตอบกลับ #95 เมื่อ: 09 มิถุนายน 2015 / 11:03:38 AM »
แข่งกันทรหดมาก กำหนดเวลา 48 ชั่วโมงแบบนี้ ห้ามหนีไปเที่ยวไหนเลยอ่ะ เกิดป่วยหรือคอมเดี้ยงนี่ แย่เลยนะครับ

สู้สู้ครับ

ออฟไลน์ ake1

  • Jr. Member
  • **
  • กระทู้: 168
Re: ลงแข่ง Reverse Engineering Contest (REC IV)
« ตอบกลับ #96 เมื่อ: 10 มิถุนายน 2015 / 11:05:44 AM »
แข่งกันทรหดมาก กำหนดเวลา 48 ชั่วโมงแบบนี้ ห้ามหนีไปเที่ยวไหนเลยอ่ะ เกิดป่วยหรือคอมเดี้ยงนี่ แย่เลยนะครับ
สู้สู้ครับ

จะพยายามครับ  :)
เมื่อวานค่ำๆโหดสุดตั้งแต่แข่งมา  ออก 2 ข้อยาก ข้อที่ 29 และ 30  กำหนดเวลารวม 48 ชั่วโมง บริคห้ามใช้หลายชิ้น รอยต่อบริคและระยะต่างๆต้องเหมือน 100% ที่โหดสุดๆคือ มีโอกาสส่งวิธีต่อแค่ครั้งเดียว จากเดิมส่งแก้ไขกี่ครั้งก็ได้ พลาดคือจบเกม ต้องชัวร์จริงๆต่อแต่ในคอมไม่ได้แล้วครับ

This time, you only get ONE attempt! If you are building digitally, feel free to ask a friend to test a connection for you -- but if your solution isn't up to spec the first time, you're out. Read the rules carefully and ask questions.
 
You have only 48 hours to solve each challenge. This is the last one! It will end June 11th at 15:00 GMT.
 
Only those tied for first place are eligible for points this week. The main contest is over, and everyone in the running is in bold on the scoreboard.
 

REC Tiebreaker E by eldeeem, on Flickr
A couple more challenges :)
 
Part Restrictions:
• Seams between bricks must match mine
• All parts should be attached, of course.
• No minifig hands, rollerskates, string, rubber bands, flex tubing, or stickers!
 
The 4x4 tiled section sits exactly 1/4 plate above the rest (so it's flush with the edge of the red 2x2 jumper). Bottom looks the same as the top. Nothing should be allowed to shift or rotate freely.

REC Tiebreaker F by eldeeem, on Flickr

Part Restrictions:
• Gaps between bricks must match mine
• NO Travis bricks!
• All parts should be attached, of course.
• No minifig hands, rollerskates, string, rubber bands, flex tubing, or stickers!
 
The 1x3 plate is inset exactly 1/2 plate. The other side looks essentially the same as the front. Nothing should be allowed to shift or rotate freely.


« แก้ไขครั้งสุดท้าย: 10 มิถุนายน 2015 / 11:15:03 AM โดย ake1 »

ออฟไลน์ deecga

  • Verified Member
  • Newbie
  • *
  • กระทู้: 30
Re: ลงแข่ง Reverse Engineering Contest (REC IV)
« ตอบกลับ #97 เมื่อ: 11 มิถุนายน 2015 / 03:17:12 PM »
สู้ๆครับ เชียร์สุดใจครับ
อยากช่วยหาพาร์ทส่งไปให้ต่อเลยครับ แต่เวลาน้อยจังคงส่งไปไม่ทันครับ

ออฟไลน์ ake1

  • Jr. Member
  • **
  • กระทู้: 168
Re: ลงแข่ง Reverse Engineering Contest (REC IV)
« ตอบกลับ #98 เมื่อ: 12 มิถุนายน 2015 / 12:02:54 PM »
สู้ๆครับ เชียร์สุดใจครับ
อยากช่วยหาพาร์ทส่งไปให้ต่อเลยครับ แต่เวลาน้อยจังคงส่งไปไม่ทันครับ
ขอบคุณครับ ที่รจิงกรรมการก็บอกว่าถ้าไม่มีพาร์ทก็ส่งวิธีต่อไปให้เพื่อที่มีพาร์ททดสอบแทนก็ได้  :)
สองข้อสุดท้ายแล้วครับ


REC 11.1: Solved! by eldeeem, on Flickr

REC 11.2: Solved! by eldeeem, on Flickr


REC Tiebreaker G

Last two! I promise! :D
 
Remember, you only get ONE attempt each! If you are building digitally, feel free to ask a friend to test a connection for you -- but if your solution isn't up to spec the first time you submit it to me, you're out. Read the rules carefully and ask questions.
 
You have only 48 hours to solve both challenges. These two will end June 13th at 15:00 GMT.
 
Only those tied for first place are eligible for points this week. The main contest is over, and everyone in the running is in bold on the scoreboard.
 
Part Restrictions:
• Seams between bricks must match mine (note that the bottom brackets are parallel to the top ones!)
• All parts should be attached or trapped, of course.
 
• No minifig hands, rollerskates, LOTR rings, string, rubber bands, flex tubing, or stickers! Seems this list of default forbidden parts grows every time.

REC Tiebreaker G by eldeeem, on Flickr

REC Tiebreaker H
Last two! I promise! :D
 
Remember, you only get ONE attempt each! If you are building digitally, feel free to ask a friend to test a connection for you -- but if your solution isn't up to spec the first time you submit it to me, you're out. Read the rules carefully and ask questions.
 
You have only 48 hours to solve both challenges. These two will end June 13th at 15:00 GMT.
 
Only those tied for first place are eligible for points this week. The main contest is over, and everyone in the running is in bold on the scoreboard.
 
Part Restrictions:
• The back looks the same as the front two sides -- it's three of these slopes. There is no dish on the bottom.
• All parts should be attached or trapped, of course.
• My build sits a half-plate above the table (i.e., something sticks out a half-plate beyond the slopes on the underside). I will give an extra point if you can do it without anything extending below the slopes!
 
• No minifig hands, rollerskates, LOTR rings, string, rubber bands, flex tubing, or stickers!

REC Tiebreaker H by eldeeem, on Flickr


ออฟไลน์ deecga

  • Verified Member
  • Newbie
  • *
  • กระทู้: 30
Re: ลงแข่ง Reverse Engineering Contest (REC IV)
« ตอบกลับ #99 เมื่อ: 12 มิถุนายน 2015 / 01:14:37 PM »
ถ้ามีอะไรให้ผมช่วยได้ก็บอกได้เลยนะครับผม

สู้ๆครับ เชียร์สุดใจครับ
อยากช่วยหาพาร์ทส่งไปให้ต่อเลยครับ แต่เวลาน้อยจังคงส่งไปไม่ทันครับ
ขอบคุณครับ ที่รจิงกรรมการก็บอกว่าถ้าไม่มีพาร์ทก็ส่งวิธีต่อไปให้เพื่อที่มีพาร์ททดสอบแทนก็ได้  :)
สองข้อสุดท้ายแล้วครับ